LED Inductive Speed Sensor (M8)
- Manufacturer:
- Smiths Gauges
- Click here for:
-
LED Speedo Sensor Wiring
LED Inductive Speedometer sensor. M8 thread with three wires. Blue for earth, Brown for live feed and Black wire for signal to gauge. Pulses can be picked up from bolt heads, on a driveshaft or CV Joint for example. Must be mounted as close to the bolt heads as possible, 2mm maximum. LED Light in the end lights up when the unit is working.
Cables are approx. 2 metres long but can be lengthened as these are just flying leads.
Please click on the Technical Info tab above the product image for a wiring diagram for the LED Speedo sensor.
Cables are approx. 2 metres long but can be lengthened as these are just flying leads.
Please click on the Technical Info tab above the product image for a wiring diagram for the LED Speedo sensor.
You may also wish to consider
Product Categories
Secure Shopping
