Davies Craig Temperature Sensor Fitting Kit
This simple, economical Adaptor Kit from Davies Craig allows easy fitting directly into the top radiator hose. Just fit the probe into the compression fitting, remove about 17mm (2/3”) of radiator hose, fit the adaptor between each hose and secure the hose clamps. The kit comes complete, as shown, for a watertight and effective probe installation. Extra rubber sleeves are supplied to enable fitment to radiator hose sizes from 32mm to 40mm (1¼” to 1½”) diameter. Suits all temperature sensors with either a 5mm (3/16”) or a 6mm (1/4” outside diameter and temperature gauge senders with 6mm (1/4”) NPT thread.
The Inline Sensor Adaptor simply fits into your engine’s top radiator hose. The adaptor ends for hose fitting are 35mm in size.
With the use of the 3mm adaptor sleeve (Included in kit), this can be increased to 38mm (Part #18510)
With the use of the 6mm adaptor sleeve (Optional), this can be increased to 41-42mm (Part #18511)
The thread (Hole) on this Inline Temp Sensor Adaptor is 1/4" NPT.
The Inline Sensor Adaptor simply fits into your engine’s top radiator hose. The adaptor ends for hose fitting are 35mm in size.
With the use of the 3mm adaptor sleeve (Included in kit), this can be increased to 38mm (Part #18510)
With the use of the 6mm adaptor sleeve (Optional), this can be increased to 41-42mm (Part #18511)
The thread (Hole) on this Inline Temp Sensor Adaptor is 1/4" NPT.
You may also wish to consider
Product Categories
Secure Shopping
