ITG Megaflow Air Filter JC40 Sausage Domed Type in Black
- Manufacturer:
- ITG
- Click here for:
-
ITG JC40 Specification Sheet
ITG Megaflow foam air filter in Black for JC40 size base plate. The JC40 model of ITG Air Filter is designed to suit small twin carburettor applications and some throttle body set-ups. This domed sausage type filter is hand built, and ideally suited where space is at a premium for when a standard JC40 will not fit.
The two outer layers of foam provide optimum filtration and load-up capacity whilst the inner layer is made from special self-extinguishing foam. These two layers combined give the very best air flow, engine protection and safety.
The ITG JC40 Sausage Air Filters are available in differing heights to help fitment for your application. ITG recommend fitting the tallest element possible, though a gap of 13mm (1/2") average must be left over the top of the filter for air to circulate. When using Ram pipes, there must be an absolute minimum gap of 19mm (3/4"), but preferably around 32mm (1 1/4") between the end of the ram pipe and the underside of the top of the filter.
Please select your required JC40 Air Filter internal height from the drop down menu above.
The two outer layers of foam provide optimum filtration and load-up capacity whilst the inner layer is made from special self-extinguishing foam. These two layers combined give the very best air flow, engine protection and safety.
The ITG JC40 Sausage Air Filters are available in differing heights to help fitment for your application. ITG recommend fitting the tallest element possible, though a gap of 13mm (1/2") average must be left over the top of the filter for air to circulate. When using Ram pipes, there must be an absolute minimum gap of 19mm (3/4"), but preferably around 32mm (1 1/4") between the end of the ram pipe and the underside of the top of the filter.
Please select your required JC40 Air Filter internal height from the drop down menu above.
You may also wish to consider
Product Categories
Secure Shopping
