Cleco Pin Clamp with 1/8" (3.2mm) Diameter
Cleco pin clamp to fit 1/8" (3.2mm) hole. Cleco pin clamps are a re-useable tool for holding panels together whilst during the fabrication process
Designed to be installed using the Cleco pliers as you drill holes that are to be riveted together later. The clamps then hold the panels perfectly in place. Once riveted, the clamps can be quickly removed.
These 1/8" diameter Cleco clamps have a maximum grip length of up to 1/4" (6mm).
Designed to be installed using the Cleco pliers as you drill holes that are to be riveted together later. The clamps then hold the panels perfectly in place. Once riveted, the clamps can be quickly removed.
These 1/8" diameter Cleco clamps have a maximum grip length of up to 1/4" (6mm).
You may also wish to consider
Product Categories
Secure Shopping
