Tilton Electric Oil Pump with Viton Seals
- Manufacturer:
- Tilton
- Click here for:
-
Tilton Oil Pump Specification
Tilton oil cooling pump. A diaphragm pump with internal cooling fan.12 volt motor. Weight 1.5kg. 3/8NPT ports. Pump body made from light weight nylon, care needs to be taken when tightening unions. Performance, Flow 2gals/10litres per minute. Pressure 50psi/3.5bar. Temperature for constant use up to 130°C intermittent use up to 150°C. Max current draw 7 Amps.
This pump is suitable for using in axle, gearbox and turbocharger oil cooling installations. The pump is self priming and can be positioned anywhere relative to intake, but if vertically mounted the ports should face downwards to prevent leakage in to the motor. Two screws can be removed to rotate the head to simplify plumbing.
Please note, this pump is not equipped with a bypass so damage may result from pumping against a blockage, for this reason, oil must be allowed to reach operating temperature of at least 70°C before the pump can be switched on.
Installation instructions for the Tilton Oil Pump can be found in the Technical Info tab above the product image.
This pump is suitable for using in axle, gearbox and turbocharger oil cooling installations. The pump is self priming and can be positioned anywhere relative to intake, but if vertically mounted the ports should face downwards to prevent leakage in to the motor. Two screws can be removed to rotate the head to simplify plumbing.
Please note, this pump is not equipped with a bypass so damage may result from pumping against a blockage, for this reason, oil must be allowed to reach operating temperature of at least 70°C before the pump can be switched on.
Installation instructions for the Tilton Oil Pump can be found in the Technical Info tab above the product image.
You may also wish to consider
Product Categories
Secure Shopping
