Shop by Brand
  • Shop by Brand
  • Accusump by Canton
  • ADA
  • Advance Tapes
  • Aerocatch
  • AeroLoc
  • Alpinestars
  • Ampep
  • Anderson
  • AP Racing
  • Arai
  • AST Stop Watches
  • Aurora Rod End Bearings
  • Autoglym
  • Automec Brake Products
  • Avanti
  • AVO-TECHNICS
  • Bell
  • BG Racing
  • Bob Heath
  • Bosch
  • CamLoc
  • Carbon X
  • Cartek
  • Castle Combe Circuit
  • Castrol
  • Coast Fabrications
  • Cobra Seats
  • Cohline
  • Comex
  • Concept Racing
  • Cool It
  • Davies Craig
  • DMS
  • Dow Corning
  • Dunlop
  • Dzus
  • Eibach
  • Facet
  • Faulkner Springs
  • FK Rod Ends
  • FLURO Rod Ends
  • FSE
  • FuelX
  • Gates Vulcoflex
  • Girling
  • GKN
  • Go Pro
  • Gold Plug
  • Goodridge
  • Grayston
  • Grip Tyre Softener
  • Halo by Orthene
  • Hans
  • Hellerman
  • Hot Wire
  • Hunter
  • Hylomar
  • Indi
  • Intercomp
  • ITG
  • J-B Weld
  • Jetex
  • K-Seal
  • Laminova
  • Lifeline
  • Longacre
  • Lucas
  • Lumenition
  • Mann Filters
  • McLube Automotive
  • Mechanix
  • Merlin
  • Millers Oils
  • Mintex
  • Mobil 1 Oil
  • Mocal
  • Momo
  • Monit
  • Mountney
  • National
  • Newton Equipment
  • NGK Spark Plugs
  • NMB Bearings
  • Norma
  • OBP
  • Odyssey
  • Omex
  • OMP
  • P1 Racewear
  • Pagid Brake Pads
  • Peltor
  • Performance Braking
  • Pig
  • Piper
  • Polybush
  • Powervamp
  • Protech Shocks
  • PWR Oil Coolers
  • Racetech
  • Racewear Clearance
  • Rain-X
  • Recoil
  • Red Line
  • Revotec
  • Ringers
  • Samco
  • Schroth
  • Setrab
  • Sikaflex
  • Silkolene
  • Simpson
  • Smiths Gauges
  • SPA Technique
  • Sparco
  • Spax
  • Springalex
  • Stack
  • Stand 21
  • Stant
  • Stilo
  • SUSA
  • Sytec
  • Terratrip
  • Tex Mirrors
  • Thermo-Tec
  • Tickitape
  • Tilton
  • Tripac Fans
  • TRS
  • Valvoline
  • VDO
  • Vitaloni
  • VP Racing
  • Walbro
  • Walero
  • Webcon
  • Willans
  • Wilwood
  • Wipac
  • Zircotec

Setrab Oil Cooler Adaptor 1/2 BSP to M22

  • Setrab Oil Cooler Adaptor 1/2 BSP to M22
  •  
£ 7.63

7h 36m left to order for delivery on Fri 14th February to most of UK and Europe.  Add item/s to basket to check delivery options and cost for your exact location.

Setrab Oil Cooler ADAPTOR 1/2 BSP to M22 x 1.5.

All Setrab Oil coolers are supplied with M22 female threads. A male/male adaptor is required mate to the normal oil union threads. Adaptors are available with BSP, JIC and Metric threads and 2 are required for each cooler.

All Setrab Oil Coolers are made in Sweden.

The coolers must be mounted so that they are protected from excessive vibration, rubber bobbins are ideal, and all 4 brackets should be used. The hose runs to the cooler should not be rigid or exert tension on the unions. A general rule is that a low cooler with a few long tubes gives a slightly higher pressure drop than a narrow cooler with more rows.